What to know about the Candy Bomber’s planes

OREM — Gail Halvorsen’s C-54 cargo plane wasn’t much different from the countless others that flew from one side of the Berlin Wall to the other, ferrying supplies into Soviet-controlled Berlin.

But to the children who saw his plane’s wiggling wings, they knew exactly whose plane it was.

During Halvorsen’s run as the “Candy Bomber” during the Berlin Airlift, he flew a Douglas C-54 Skymaster. According to Boeing, the C-54 was derived from a civilian aircraft ordered by United Airlines. The two craft were virtually the same; while one transported civilians, the other transported cargo.

The C-54 was so common, it was used by Winston Churchill, Douglas MacArthur and Franklin D. Roosevelt. A modified C-54 became the first presidential aircraft, ordered for Roosevelt.

More than 1,100 were ordered by the U.S. Armed Forces during World War II. The C-54s, along with the R5D model planes, were the core of the Berlin Airlift.

More than two dozen C-54 flight crews participated in the candy bombing runs, then dubbed Operation “Little Vittles.”

After World War II, the C-54 continued its service as the main craft of the airlift during the Korean War.

When Halvorsen flew over Orem on Friday, it wasn’t in a Skymaster, but a Lockheed PV-2 Harpoon. In 1937, Lockheed Aircraft proposed a modified, lighter version of the Lockheed 18 to create a light bomber. After several variants, the PV-2 Harpoon first flew in late 1943. The PV-2 had increased load-carrying capacity, according to the National Naval Aviation Museum, and boasted heavier armaments.

Halvorsen’s new craft was originally

Article source: http://www.heraldextra.com/news/local/special-sections/halvorsen/what-to-know-about-the-candy-bomber-s-planes/article_98420d5c-ccb0-55d1-883e-80938b45561b.html

Posted in Model Airpanes | Tagged , | Leave a comment

Could A Combiner Wars Release Of New Mold Unite Warriors Figures Be In The …

TakaraTomy is making no secret of an aim to “perfect” as much as they can the Combiner Wars toys for their iteration of the toyline. Groove is joining their Defensor as a full limb, raising the bar just a bit from restoring classic team lineups with recolors as they’re doing with Superion and Menasor. It doesn’t seem much of a leap that they could make an original Blast Off figure for when they get to Bruticus, but what are the chances of seeing these made available through Hasbro? Keep reading…

Similar to what we noted when looking at Devastator options recently, the pricing gap between Unite Warriors box sets and assembling a full set of Combiner Wars figures is not that significant, especially with today’s very favorable exchange rate. So going in on a TakaraTomy combiner is not altogether prohibitive. I have a Unite Warriors Defensor on preorder, as it happens. But while the price might be manageable, it’s not the only concern. I personally feel the Hasbro versions of the Protectobots have better decos in general than what we’ve seen of the Unite Warriors editions so far. It’s a kind of tradeoff to make based on wanting that new figure, whether to have the most accurate combiner possible, or just wanting more unique toys to add to the pool. But if you can’t quite justify that to yourself versus the cost and what you may see as an underwhelming paint job, are you stuck missing out on Groove or

Article source: http://tformers.com/could-a-combiner-wars-release-of-new-mold-unite-warriors-figures-be-in-the-cards/27040/news.html

Posted in Model Airpanes | Tagged | Leave a comment

More Features RCM&E July 1976

Let’s cast our minds back to the long, hot summer of 1976…

On The Cover
There was just one cover line this month, introducing David Boddington’s 40” (1016mm) wingspan Nieuport 24. David’s inspiration for this W.W.I biplane came from his experience of building and flying LC Bagley’s 1948 free-flight version, equipped with a pendulum-controlled rudder. DB’s three-channel R/C version was designed for a .15 – .20 cu. in. engine and was offered as a free plan in two parts, the fuselage plan supplied with the July issue and the wing in August.
If you’re interested, the drawings for LC Bagley’s original Nieuport 17 are still available from the X-List Plans section of the MyHobbyStore website (ref. FSP285), whilst David’s featured Nieuport 24 remains in the regular range (ref. RC1384). Visit www.myhobbystore.co.uk and you’ll be surprised what’s still available.

 

 

 

 

Gliders Galore

At this time there was great interest in model gliders, with several adverts for slope and thermal soarers: Pegaus Models’ Topaz, the East Midlands Model Co. MiJet, Cambrian’s Capstan, Veron’s Big Impala, Micro Mold’s Tern, Keil Kraft’s Ivory Gull, various Multiplex soarers (including the LS-1, Alpha-H and Super Alpha), St. Leonards’ Super Nova and the Bowman Simpleton. A truly wide and varied selection.
Such was the demand for glider content that Tony Baker was drafted in as the new slope columnist to back up Geoff Dallimer’s contributions on thermal soaring.

 

 

 

 

 

 

 

 

Electric Beginnings

The advertisements also reflected a growing interest in electric power. Ripmax was promoting its Bullet 30 and Cyclone 15 electric motor equivalents for

Article source: http://www.modelflying.co.uk/news/article/rcme-july-1976/21755

Posted in Model Airpanes | Tagged | Leave a comment

How you can locate the best Edge Desk (L-Shape) Video gaming Computer Desks

Selecting the best gaming computer desks for your home or office relies on many factors which you need to take into consideration prior to scampering acquiring one.
One such factor to take note of is the location of the space you would certainly need the video gaming computer system desk to. Corner desk L-shaped video gaming computer desks are ideal if you have a tiny or limited sized room as it occupy a very little space.
You ought to likewise check the materials used. Toughness additionally relies on which product the table was crafted from. An L shaped video gaming computer system desk made from high quality products would last for many years.
A light-weight and also easy to transfer L shaped video gaming computer system workdesk is a plus. You could intend to move the table to an additional room or workplace at some point, by doing this; it would be simpler to haul it around even on your own.

Benefits of Corner Desk (L-Shape) Gaming Computer Desks:

– Provide more room for your office or home.
� Gives you much more workspace and more room for those times when you are submersed in your video gaming globe.
– These types of desks can fit computer, monitor, computer key-board, and also other equipments.
– Easier to multi job, because the table is angled as though every little thing you require is put closer to you compared with a lengthy table.
– These kinds of desks are much easier to clean as well as are actually tidier looking as well as much easier to arrange. The racks and also cabinets are specifically created and personalized to a lot better match the customer’s demands.
– L designed video gaming computer workdesks provide that elegant look into a space. Whether you put it in the edge of the area, to minimize room, or in the center of the room.
– It is easier to place these sort of desks in a hassle-free way.
– They has storage space areas under workdesk for a trash can, computer hardware, as well as various other equipment, minimizing the mess in your gaming/workspace.
When you do not actually have a specific room set apart for job or video gaming, – They are excellent for. L formed gaming computer desks are excellent for partly sectioning off a location from the rest of the room or home.

Drawbacks of Corner Desk (L-Shape) Gaming Computer Desks

– For people who choose the even more standard desk kinds, they find the L shaped video gaming computer desks a little bit large or overwhelming.

A few of the Best L Shaped Gaming Computer Desks

– Techni Mobili L-shaped Glass Computer Desk by Techni Mobili. This L designed gaming computer desk has long and also short interchangeable sides being. It has a durable 8 mm solidified shatterproof glass, a scratch-resistant powder-coated steel frame with durable engineered wood panels with a wetness immune PVC laminate veneer and also a slide-out keyboard shelf, made from crafted wood, is furnished with a safety and security stop.

– Bush Furniture Harvest Cherry Cabot Collection L-Desk. L shaped video gaming computer desk. High storage compartment, enclosed by a distinct fluted glass panel door, conceals CPUs or other peripherals, modems and routers.

– Walker Edison Soreno 3-Piece Corner Desk, Black with Black Glass by Walker Edison. This L shaped video gaming computer system desk has a beveled and also refined, toughened up shatterproof glass. Strong steel framework with powder layer surface. Includes moving key-board tray and CPU stand.

– Z-Line Belaire Glass L-Shaped Computer Desk by Z-Line Designs. This sleek L designed gaming computer workdesk is perfect for edge placement. It has a sturdy steel frame with strengthened plates on welding joints, black powder coat finish, Clear 6mm/5mm solidified glass on desktop computer, display shelf, and slide-out keyboard tray.

Posted in Uncategorized | Comments Off on How you can locate the best Edge Desk (L-Shape) Video gaming Computer Desks

Flight camp at Smith Reynolds Airport encourages students to take to the air – Winston

wsj_0704_flying

wsj_0704_flying

Joe MacCabe, a FAA certificated flight instructor with Piedmont Flight Training, prepares to fly with 12-year-old Dilan Martinez, a camper at the 2015 Jim Shaw Aviation Career Education Academy.

wsj_0704_flying

wsj_0704_flying

Joe MacCabe, a FAA certificated flight instructor with Piedmont Flight Training, taxis across the tarmac with 14-year-old Elise Colburn, a camper at the 2015 Jim Shaw Aviation Career Education Academy.



Related Galleries

Article source: http://www.journalnow.com/news/local/flight-camp-at-smith-reynolds-airport-encourages-students-to-take/article_766f3814-357a-5cd5-a3e0-66e5ab26d82c.html

Posted in Model Airpanes | Tagged , | Leave a comment

Issue of the day: Relatives mourn as death toll reaches

June 30, Online

Hundreds of relatives of victims of the Air Force’s C-130 Hercules crash attended Adam Malik General Hospital in Medan to collect the bodies of their loved ones on Tuesday night as the death toll reached 116.

Relatives of a brother and sister, who were passengers on the crashed plane, could not hold back their tears following the news that everyone on board had died.

Muti Boru Tinambunan said that her niece, Reni Boru Sihotang, a third-grade high school student, was traveling with her brother for a holiday in Pontianak, West Kalimantan. Muti waited for the bodies of her niece and nephew at the hospital’s mortuary.

Your comments:

Good maintenance will stop aircraft from falling from the sky.

Sorry to hear of the tragedy.

Troy

Hercules is the best aircraft with its excellent ability to fly even in very extreme weather.

If this can happen now, there must be something wrong.

My condolences to those who lost their families.

Gwikangge Tonce

The C-130 is the workhorse of nearly all the world’s air forces and none has had an air disaster as bad as this where both people on board and on the ground died in significant numbers!

Check the maintenance logs, check the parts lists. The only way this bird is coming down unplanned is through mechanical or pilot error.

Pauloh

Condolences to the family members who lost loved ones.

Willo

The C-130 Hercules was first flown in 1954 and since then there have been over 40 models and variants and they have been flown by more

Article source: http://www.thejakartapost.com/news/2015/07/02/issue-day-relatives-mourn-death-toll-reaches-116.html

Posted in Model Airpanes | Tagged | Leave a comment

RC model airplanes to take over the skies of North Plains

Radio controlled modelers will converge on Saturday, July 11, and Sunday, July 12, for the 2015 Oregon Scale Fly-In and United States Scale Masters Association (USSMA) Challenge at the Fly-A-Ways RC Club site just off US 26, Dersham Road exit 55 in North Plains.  

This is just the third year for the event. All models being flown must represent full-scale aircraft, either vintage or modern, military or civilian. 

Scott Enochs, president of Fly-A-Ways RC Club, expects about 30 pilots, some with multiple aircraft entries. About half will be there for the Oregon Scale Fly-In to simply fly for the fun and enjoyment of flying a scale model. Most of the models in the Fly-In are pre-fabricated and can be readily purchased at a local hobby store or online.  

The other half will be there for the USSMA Challenge, a scale modeling competition. Planes flown in this part of the event are most often built from kits or by scratch from detailed plans.

Competition flying starts 10 a.m. Saturday morning and continues approximately to 3:30 p.m. Competition flying continues at 9:30 a.m. Sunday.  

At 4 p.m. Saturday and noon Sunday, models will be lined up on the runway and spectators can get up close to view the models and talk to the pilots. Spectators can also vote for their favorite model, the winner of the voting receiving the “Peoples’ Choice” award.

Food will be available for purchase. Spectators are encouraged to bring their own folding camp chairs. No pets are allowed. Spectator parking donations of $5

Article source: http://www.oregonlive.com/hillsboro/index.ssf/2015/07/rc_model_airplanes_to_take_ove.html

Posted in Model Airpanes | Tagged , | Leave a comment