Ferrari FAQ

How much is a Ferrari? 

A new Ferrari starts at $202,723. The Ferrari California T is the most affordable model. It has a twin turbo V8 and a convertible hard top. They are capable of going 196 mph with the top up, after hitting 60 mph in only 3.3 seconds. The engine makes 553 horsepower and sends it to a dual-clutch automatic transmission. A new Ferrari 488 GTB has a starting price of $245,400. It has a twin turbo V8 mounted behind the driver. The most powerful Ferrari is the F12berlinetta. It has 731 horsepower for $319,995.  In 1962 the price of a Ferrari 250 was $18,000. The 365 GTB/4 had a base price of $19,700. Prices may have changed but performance is still the top priority.

What was the first Ferrari?

The first Ferrari was 1947 125 S. It was powered by a 1.5 liter V12 engine. It was a two-seat sports car with a tube frame chassis. It also had one of the first production five-speed transmissions to be offered. This helped the V12 deliver acceleration at any speed.  Only three cars were built that year, which makes it one of the rarest cars ever built.

 

How many Ferrari are made each year?

Since 2013, Ferrari has built 7,000 cars each year. In the 1990s they built around 4,000 cars yearly. Production reached 5,000 in 2005. But the management decided to cap the number at 7,000 to preserve the build quality and demand for the

Article source: http://blog.dupontregistry.com/news/ferrari-faq/

Posted in Model Airpanes | Tagged | Leave a comment

Stratos Is Serious About Single-engine 714

In 2008, the market hype about single- and twin-engine very light jets was at a peak, with what seemed like dozens of projects under way, and talk of VLJs darkening the skies prompting concerns among aviation authorities about how all this new traffic could be accommodated. In the midst of this frenzy, a small Oregon company called Stratos Aircraft unveiled the model 714, a single-engine, $2 million, all-composite jet that promised far better performance than its in-development competitors. 

Fast forward a few years, and while Stratos Aircraft made some headway and even exhibited at the annual NBAA conference, the company quietly refined the design in a wind tunnel and began putting an airplane together. Then, on November 30 last year, test pilot Dave Morss lifted off in the prototype 714 from Roberts Field in Redmond, Oregon, the airport closest to the company’s off-airport Redmond headquarters and manufacturing facility.

Since then Morss has flown the aircraft 30 times for 40 hours, up to 250 kias (300 ktas) and nearly 15,000 feet. Plans are for him to fly the prototype 714 to this year’s EAA AirVenture show in Oshkosh, Wisconsin, although he will have to stay below 18,000 feet because the 714 isn’t IFR approved. The prototype also isn’t pressurized, although it has been pressure tested and can be pressurized, but the equipment to do so isn’t installed. The prototype will be fitted with a fresh interior and be painted before flying to Oshkosh.

The moniker 714 has a specific meaning, and it is spelled out in

Article source: https://www.bjtonline.com/business-jet-news/stratos-is-serious-about-single-engine-714

Posted in Model Airpanes | Tagged | Leave a comment

Fun in the sky with your feet on the ground

It’s an adrenaline rush from the ground.

Every time Foley Soroye takes his model airplanes out to the Nipissing Miniature Aircraft Club (NIPMAC) he feels like a kid again.

“It’s like ballet in the air. You perform an air show, but you have two feet safely on the ground,” he said Saturday.

“It’s more fun operating a plane from the ground because there’s no chance of you getting sick.”

Soroye is one of almost 100 members who have a passion for flying that has turned into a hobby.

Members have spent time testing their skills throughout the winter in the gymnasium at West Ferris Secondary School.

But Saturday was opening day. It was time to get the dust off of the planes, their fingers and brains.

It’s officially flying season.

Every weekend throughout the summer members gather at the NIP MAC club, located off Cranberry Trail in Callander.

The open large fields is a perfect location for testing and flying model aircraft.

“When you fly you get this adrenaline rush. It’s fun and you feel like you can do anything,” Soroye said.

Since the 70s, local model airplane enthusiasts have joined together to share their passion for aviation.

They’ve enhanced their flying space by building a 65-foot fabric runway, which has made some pilots better.

Club president Cameron Sanders said North Bay and Area has a strong aviation community.

“Our members fly everything from nitro gas to electric to gliders and drones,” he said. “I remember when we would build the planes out of balsam wood, but now you can buy ready to fly

Article source: http://www.nugget.ca/2017/05/21/fun-in-the-sky-with-your-feet-on-the-ground

Posted in Model Airpanes | Tagged , | Leave a comment

Rochester Modelers Club Hosts “Learn to Fly” Event for Cub Scout Pack 201

ROCHESTER — On Saturday, April 29, 2017, the Rochester Modelers Club hosted its first “Learn to Fly” radio-controlled model aircraft event for about a dozen members of the Newmarket Cub Scout Pack 201. The event was held to teach the kids about flying radio-controlled (RC) model aircraft — what they are, how they work, how to fly them safely, and to give them the opportunity to see many different types of aircraft and what each of them can do. Scouts were able to see model aircraft including: duct fan flying wings; duct fan jet; electric prop-powered planes; quads and more. Throughout the day RMC member volunteers were on-hand to teach the Scouts about all the different aspects of RC flying and to answer any questions they had.

The weather was beautiful last Saturday as the event got underway with a field safety meeting for the Cub Scouts so they could learn the rules of flying RC model aircraft at the field. The Scouts then built their own airplanes while RMC club volunteers discussed the different parts of planes, how to control them and how to adjust them for flight. Then everyone headed over to the “pit area” to go over all the parts of the radio control (RC) trainer plane and radio system. The group then tried out the rubber-band powered planes they had made earlier and they all took part in a flying contest. The kids really enjoyed the First Person View (FPV) quad demo

Article source: http://www.fosters.com/news/20170521/rochester-modelers-club-hosts-learn-to-fly-event-for-cub-scout-pack-201

Posted in Model Airpanes | Tagged , | Leave a comment

Barbie III: A Rare Howitzer Model Appears at Sun ‘n Fun Airshow

At this year’s annual SUN n’ FUN aviation convention in Central Florida, the warbird Barbie III made its first public appearance in many years. Boasting a 75 mm cannon in the nose, the twin-engine, twin-tail bomber turned the heads of many who’d never seen or ever heard of the uncommon World War II Howitzer model.

Last year, the Cavanaugh Flight Museum in Addison, Texas purchased Barbie III and made it flightworthy again. Previously, the B-25 Mitchell bomber sat unused for eight years at the airport of Deland, Florida.

The Barbie is painted a drab olive color like it would have been in wartime, unlike many shiny restored warbirds.

Doug Jeanes, museum director of the CFM, described the plane’s rarity. “This is the No. 2 prototype of the H Model and the only one still flying. It never saw wartime service, but it carries the markings of R.T. Smith, an original member of the Flying Tigers, who named the plane for his wife when he transitioned from fighters to bombers.”

The Oldsmobile Division of General Motors built the Barbie III’s enormous Howitzer cannon, which sits in the nose of the bird. This cannon shoots an M46 high explosive 75 MM shell and is in fact the same model found in the Sherman Tank. Before the invention of an automatic loader, a crew member posted near the plane’s

Article source: http://www.wingsjournal.com/barbie-iii-rare-howitzer-model-appears-sun-n-fun-airshow

Posted in Model Airpanes | Tagged | Leave a comment

Judge dismisses former student’s suit against Timberlane teacher …

Former Timberlane High student sues school for injury

BRENTWOOD — A judge has thrown out a former student’s lawsuit against Timberlane Regional High School and one of its teachers that claimed the teenager’s eye was injured by a splinter after the teacher used a lacrosse stick to smash wooden airplanes during class.

Rockingham County Superior Court Judge David A. Anderson recently dismissed the case filed by 18-year-old Corey Rocco of Sandown.

Rocco sued the high school, teacher James Kelly, and School Administrative Unit 55 over the Dec. 12, 2014, incident when Rocco was a student in Kelly’s American Studies class.

According to the suit, Kelly had instructed students to make model airplanes from popsicle sticks and near the end of the class he took a lacrosse stick and began hitting the planes to test their durability.

Rocco alleged Kelly took no safety precautions and that a piece of wood from one of the planes hit his right eye.

Rocco claimed the accident caused him to suffer severe and permanent injuries to his eye that required surgery and resulted in medical bills.

The suit accused Kelly and the school of negligence but also claimed that the school and SAU 55 were liable because of negligent supervision.

Kelly and the school asked the court to dismiss the case, arguing they are entitled to immunity under RSA 507-B:4, which provides immunity to municipal employees if they act within the scope of employment and with good faith.

The judge’s order said Kelly “points out that there are no facts

Article source: http://www.unionleader.com/courts/Judge-dismisses-former-students-suit-against-Timberlane-teacher-over-eye-injury-05182017

Posted in Model Airpanes | Tagged , | Leave a comment

Greenwich’s Ann’s Hobby Center Going Strong After 30 Years

Longtime Greenwich resident Ann Suger stands in front of her shop, Ann’s Hobby Center. (Michelle Moskowitz photo)

By Michelle Moskowitz
Sentinel Correspondent

Henri Matisse said, “Creativity takes courage.”

While it may be difficult these days to find an adult or a child not focused on an electronic device for a welcome diversion from the day-to-day stressors, people in Greenwich are also exploring their creative sides through crafting and modeling—with the help of Ann’s Hobby Center in Cos Cob.

Ann’s Hobby Center, located at 405 E. Putnam Ave., has been providing a wide selection of hobby items and crafting essentials for both Fairfield and Westchester counties for over 30 years. 

As the bell chimes upon entering the hobby shop, a customer has just enough space to maneuver the aisles stockpiled with thousands of crafting tools, parts, kits and hobby essentials.

The shop brims with plastic and wood model airplanes, ships, rockets, tanks and cars, as well as myriad varieties of puzzles and collectibles for all ages and interests.

Ann’s Hobby Center, located on East Putnam Ave., is home to a plethora of toys that would keep any kid (or adult) quite content. (Michelle Moskowitz photo)

It also carries pine cars, RC, slot cars, and a vast assortment of antique dollhouses, including delicate, miniature Victorian furniture, supplies and furnishings, enabling one to build any type of scene her imagination can conjure.

Longtime proprietor Ann Suger has lived in Greenwich for almost

Article source: https://www.greenwichsentinel.com/2017/05/20/greenwichs-anns-hobby-center-going-strong-after-30-years/

Posted in Model Airpanes | Tagged , | Leave a comment